STM Article Repository

A

Akor, T. (2022) An Experimental Investigation of Jatropha Seed Oil as Austempering Quenchant for Ductile Cast Iron. In: Novel Perspectives of Engineering Research Vol. 6. B P International, pp. 75-80. ISBN 978-93-5547-459-9

Almeida, Bruno Seixas Gomes de and Neto, Ivan Barbosa Couto and Filho, Armando Carlos de Pina (2021) Design of a Waste Compacting Robot for Residential Use: An Advanced Study. In: New Approaches in Engineering Research Vol. 10. B P International, pp. 113-123. ISBN 978-93-91595-42-5

Alogla, Ageel Abdulaziz and Alruqi, Mansoor (2021) Aircraft Assembly Snags: Human Errors or Lack of Production Design? Aerospace, 8 (12). p. 391. ISSN 2226-4310

Alturki, Alaa Mohammad and Rushdi, Ali Muhammad (2021) Variations of the Time to Failure (TTF) for Specific Components in Aeronautical Navigation Systems. Journal of Engineering Research and Reports, 20 (2). pp. 59-68. ISSN 2582-2926

Anderson, Judith and Scholz, Dieter (2021) Oil Fumes, Flight Safety, and the NTSB. Aerospace, 8 (12). p. 389. ISSN 2226-4310

Anushkannan, N. K. and Mangalam, H. (2022) Phase Frequency Detector (PFD) Design with Frequency Dividers for a Phase Locked Loop (PLL) in 0.18-µm CMOS Technology. In: Technological Innovation in Engineering Research Vol. 3. B P International, pp. 28-43. ISBN 978-93-5547-692-0

Asinyetogha, H. Igoni and Raymond, A. Ekemube and Silas, O. Nkakini (2019) Predicting tractor fuel consumption during ridging on a sandy loam soil in a humid tropical climate. Journal of Engineering and Technology Research, 11 (3). pp. 29-40. ISSN 2006-9790

Awadelrahman, M. A. Ahmed and Zong, Yi and Li, Hongwei and Agert, Carsten (2017) Economic Model Predictive Control for Hot Water Based Heating Systems in Smart Buildings. Energy and Power Engineering, 09 (04). pp. 112-119. ISSN 1949-243X

B

Bagio, Toni Hartono and Alisjahbana, Sofia W. and Darjanto, Helmy and Najid, Najid (2023) Orthotropic plates with dynamic vertical seismic load modeled as multi line. Engineering Solid Mechanics, 11 (2). pp. 135-150. ISSN 22918744

Belalo, Lester Joseph T. and Arnido, Rey Nino C. (2021) “Rey Resin Dispense Pattern” A Solution to Package Voids Defect on Thinner Package Thickness in Compression Mold. Journal of Engineering Research and Reports, 20 (2). pp. 45-58. ISSN 2582-2926

Bernède, J. C. and Cattin, L. (2021) Study on Indium Free Transparent and Flexible Electrode: Dielectric/Metal/Dielectric Multilayer Structures from Smart Window to Semi-transparent Solar Cells. In: New Approaches in Engineering Research Vol. 10. Book Publisher International (a part of SCIENCEDOMAIN International), pp. 73-96. ISBN 978-93-91595-42-5

Bi, Jiawei Kelvin and Loke, Zhi Cheng Kelvin and Lim, Chi Keong Reuben and Teng, Kok Hoon Tony and Koh, Pak Keng (2022) Mechanical Properties of Cold Sprayed Aluminium 2024 and 7075 Coatings for Repairs. Aerospace, 9 (2). p. 65. ISSN 2226-4310

C

Che Hussin, Che Haziqah and Mandangan, Arif (2021) Application of Differential Transformation Method for Solving Eighth-order Boundary Value Problems. In: Advanced Aspects of Engineering Research Vol. 15. B P International, pp. 92-100. ISBN 978-93-91215-95-8

Chen, Laijun and Wang, Yuyang and Zheng, Tianwen and Sun, Zhenquan (2017) Consensus-Based Distributed Control with Communication Time Delays for Virtual Synchronous Generators in Isolate Microgrid. Energy and Power Engineering, 09 (04). pp. 102-111. ISSN 1949-243X

Chen, Yan and Gao, Chunxiang and Chu, Wuli (2022) Effect and Mechanism of Roughness on the Performance of a Five-Stage Axial Flow Compressor. Aerospace, 9 (8). p. 428. ISSN 2226-4310

D

Dulo, Husen and Zelalem, shalemew (2021) Effects of in-situ moisture conservation techniques on maize (Zea mays) yield and yield components in moisture deficit area of Dugda Woreda, Ethiopia. Journal of Engineering and Technology Research, 13 (1). pp. 1-7. ISSN 2006-9790

E

Elbehiery, Khaled and Elbehiery, Hussam (2021) Study on Millennium Robotics, Powered by Artificial Intelligence and Cloud Engineering. In: New Approaches in Engineering Research Vol. 10. B P International, pp. 124-137. ISBN 978-93-91595-42-5

F

F., Obiadi Ifeanyi and M., Udofia Kufre and M., Udofia Kingsley (2024) Comparative Analysis of Microstrip Antenna Arrays with Diverse Feeding Techniques. Journal of Engineering Research and Reports, 26 (1). pp. 18-38. ISSN 2582-2926

Fan, Wong Siew and Dol, Sharul Sham (2021) Application of Ultrasonic Velocity Profiler (UVP) in the Crude Oil Emulsion Pipeline Flow. In: Advanced Aspects of Engineering Research Vol. 15. B P International, pp. 112-124. ISBN 978-93-91215-95-8

Fatima, LACH-HEB and Mohamed, Cherif AIDARA and Mamadou, Lamine NDIYAE and Anna, Kerstin USBECK (2022) Evaluation of the impact of partial shading on the performance of photovoltaic panels. Journal of Engineering and Technology Research, 14 (1). pp. 1-8. ISSN 2006-9790

Fu, Guanghui and Yu, Yang and Sun, Wei and Kaku, Ikou (2023) To reduce maximum tardiness by Seru Production: model, cooperative algorithm combining reinforcement learning and insights. International Journal of Industrial Engineering Computations, 14 (1). pp. 65-82. ISSN 19232926

G

Galkina, A. I. and Grishan, I. A. and Kleinosova, N. P. and Orekhvo, D. O. and Khrunichev, R. V. (2023) Study of Electronic Educational Resources for Training Specialists in the Field of "Radio Engineering". In: Research and Developments in Engineering Research Vol. 1. B P International, pp. 117-128. ISBN Dr. Natt Makul Research and Developments in Engineering Research Vol. 1 03 29 2023 03 29 2023 9788119102716 B P International (a part of SCIENCEDOMAIN International) 10.9734/bpi/rader/v1 https://stm.bookpi.org/RADER-V1/issue/view/1009

Gao, Gao and Lo, Kwoklun and Fan, Fulin (2017) Comparison of ARIMA and ANN Models Used in Electricity Price Forecasting for Power Market. Energy and Power Engineering, 09 (04). pp. 120-126. ISSN 1949-243X

Gao, Yi and Lei, Juanmian (2022) Numerical Investigation on Transient Effect of Jet Interference Characteristics of Lateral-Jet-Controlled Spinning Missile. Aerospace, 9 (8). p. 430. ISSN 2226-4310

Gramatyka, Jakub and Paszkiewicz, Przemysław and Grabowski, Damian and Parzybut, Adrian and Bodych, Daria and Wróblewski, Krzysztof and Surmacz, Paweł and Pietrzak, Krzysztof (2022) Development of POLON—A Green Microsatellite Propulsion Module Utilizing 98% Hydrogen Peroxide. Aerospace, 9 (6). p. 297. ISSN 2226-4310

H

Halder, Ujjal and Gopinath, K. and Thomas, T. A. Manin and Chandru, T. and Sandeep, S. and Ramkumar, Abishek Prabakaran and Prabhu, B. (2023) Sophisticated Water Quality and Management System. In: Research and Developments in Engineering Research Vol. 1. B P International, pp. 164-185. ISBN 978-81-19102-73-0

Han, Dongmei and Li, Chuanjun and Shi, Zhongjiao (2022) Attitude Autopilot Design Based on Fuzzy Linear Active Disturbance Rejection Control. Aerospace, 9 (8). p. 429. ISSN 2226-4310

Himaja, K and Kumar, T. Anil and Kalyani, S. Tara (2022) Dynamic Stability Enhancement of SMIB Power System with PSS-SVC with LQR Optimal Control. In: Technological Innovation in Engineering Research Vol. 3. B P International, pp. 61-69. ISBN 978-93-5547-692-0

Horsfall, M. A. S. and Obafemi, A. A. and Hart, A. I. (2023) Survey of Encroachment of the Benin-Ughelli Transmission Line Right of Way. Journal of Engineering Research and Reports, 25 (12). pp. 34-42. ISSN 2582-2926

Hu, Hang and Zhang, Hang (2022) Optimization of Throughput for the Secondary Users with Novel Cooperative Spectrum Sensing Frame Structure. In: Novel Perspectives of Engineering Research Vol. 6. B P International, pp. 81-96. ISBN 978-93-5547-459-9

Hu, Yanpeng and Guo, Jin and Ying, Pei and Zeng, Guannan and Chen, Nanyu (2022) Nonlinear Control of a Single Tail Tilt Servomotor Tri-Rotor Ducted VTOL-UAV. Aerospace, 9 (6). p. 296. ISSN 2226-4310

I

Igwenagu, Udochukwu ThankGod Ikechukwu and Salami, Abidemi Ayodotun and Arigbabu, Abayomi Shamsudeen and Mesode, Cassandra Esambe and Oladoyinbo, Tunbosun Oyewale and Olaniyi, Oluwaseun Oladeji (2024) Securing the Digital Frontier: Strategies for Cloud Computing Security, Database Protection, and Comprehensive Penetration Testing. Journal of Engineering Research and Reports, 26 (6). pp. 60-75. ISSN 2582-2926

J

Jiming, Hu and Yahui, Wang and Ya, Li (2024) Multi-Objective Optimization of Rotary Device Bracket for Automatic Diesel Cylinder Block Line Based on ANSYS Analysis. Journal of Engineering Research and Reports, 26 (7). pp. 161-175. ISSN 2582-2926

Joy, Bethel-Wali and Chigozi, Wali and Bassey, Antigha and C., Ohaga Blessing and Ifeyinwa, Ogbu (2023) Groundwater Quality Analysis in Eleme Metropolis: A Physiochemical Perspective. Journal of Engineering Research and Reports, 25 (10). pp. 47-58. ISSN 2582-2926

K

Kanhukamwe, Quinton Chamunorwa and Sharma, Sanjeev and Sharma, Pritam Babu and Garg, Suresh Kumar (2021) A System Driven Approach to Research and Intellectual Property Generation. In: New Approaches in Engineering Research Vol. 10. B P International, pp. 97-112. ISBN 978-93-91595-42-5

Kanu, Ogbonnaya Paul and Ugwoha, Ejikeme and Udeh, Ngozi U. and Amah, Victor (2023) Modelling Groundwater Quality of Aba in Abia State Using Principal Component Analysis and Multiple Linear Regression. Journal of Engineering Research and Reports, 25 (11). pp. 39-54. ISSN 2582-2926

Khan, Shaikhul Arefin and Chowdhury, Md. Mokarram Hossain and Nandy, Uthso (2023) AI Robotics Technology: A Review. Journal of Engineering Research and Reports, 25 (10). pp. 187-194. ISSN 2582-2926

Kim, Minseok and Jung, Seunghwan and Kim, Baekcheon and Kim, Jinyong and Kim, Eunkyeong and Kim, Jonggeun and Kim, Sungshin (2023) Fault Detection Method Based on k-Nearest Neighbor Normalization and Weight Local Outlier Factor for Multimode Process Circulating Fluidized Bed Boiler. In: Research and Developments in Engineering Research Vol. 1. B P International, pp. 129-163. ISBN 978-81-19102-73-0

Kinyanjui, Samuel M. and Onyando, Japheth O. and Wambua, Raphael M. (2021) Quantitative Analysis of Geomorphologic Characteristics for Surface Runoff Determination in Amala River Catchment in Kenya. Journal of Engineering Research and Reports, 20 (2). pp. 91-106. ISSN 2582-2926

Kiselev, Sergey and Kiselev, Vladimir and Zaikovskii, Viktor (2022) Numerical Simulation of the Flow in Two-Phase Supersonic Underexpanded Gas–Particle Jets Exhausting into a Slotted Submerged Space. Aerospace, 9 (8). p. 432. ISSN 2226-4310

L

Li, Boyu and Li, Mingjie and Xia, Jie and Jin, Hao and Dong, Shurong and Luo, Jikui (2024) Hybrid Integrated Wearable Patch for Brain EEG-fNIRS Monitoring. Sensors, 24 (15). p. 4847. ISSN 1424-8220

Li, Jiaxin and Wang, Donghui and Zhang, Weihua (2022) Surrogate-Based Optimization Design for Air-Launched Vehicle Using Iterative Terminal Guidance. Aerospace, 9 (6). p. 300. ISSN 2226-4310

Liaoyuan, Wang and Zhiqiang, Liu and Zhiguang, Li (2024) Design of Control System of Oil Collection Device. Journal of Engineering Research and Reports, 26 (1). pp. 79-87. ISSN 2582-2926

Lv, Chen and Sheng, Wanxing and Liu, Keyan and Dong, Xinzhou (2017) Research on Multi-Scale Modeling of Grid-Connected Distributed Photovoltaic Power Generation. Energy and Power Engineering, 09 (04). pp. 127-140. ISSN 1949-243X

M

Ma, Yaomin (2024) Design of an All-in-One Drowning Prevention and Monitoring System. Journal of Engineering Research and Reports, 26 (6). pp. 76-82. ISSN 2582-2926

Mehdi, Ghazanfar and Bonuso, Sara and De Giorgi, Maria Grazia (2022) Plasma Assisted Re-Ignition of Aeroengines under High Altitude Conditions. Aerospace, 9 (2). p. 66. ISSN 2226-4310

Meister, Jonas and Schalcher, Stefan and Wunderli, Jean-Marc and Jäger, David and Zellmann, Christoph and Schäffer, Beat (2021) Comparison of the Aircraft Noise Calculation Programs sonAIR, FLULA2 and AEDT with Noise Measurements of Single Flights. Aerospace, 8 (12). p. 388. ISSN 2226-4310

Mohan, S. and Muralimohan, N. and Tamilchelvan, P. (2020) Restoration of Koolipalayam Reservoir by Using Bioclean STP Technology in Tirupur District, Tamilnadu. In: Emerging Trends in Engineering Research and Technology Vol. 5. B P International, pp. 133-147. ISBN 978-93-90149-08-7

Monsurat, Bello and Matthew, Olusola Oluwamukomi and Victor, N. Enujuigha (2019) Modeling of the adsorption isotherm of Pleurotus ostreatus using Guggenheim-Anderson-de Boer (GAB) equation. Journal of Engineering and Technology Research, 11 (4). pp. 41-46. ISSN 2006-9790

Moussaoui, Mohammed Lamine and Chabaat, Mohamed and Kibboua, Abderrahmane (2021) Study on Dynamic Detection of Reinforced Concrete Bridge Damage by Finite Element Model Updating. In: Advanced Aspects of Engineering Research Vol. 15. B P International, pp. 101-111. ISBN 978-93-91215-95-8

Mullick, Iftekhar Uddin and Faisal, Khan Atik and Nishat, Tarikul Islam and Bhuyan, Muhibul Haque (2024) Portable Air Quality Detector Using DSM501A Dust Sensor and Arduino Uno. Journal of Engineering Research and Reports, 26 (5). pp. 163-174. ISSN 2582-2926

Musrifah, . and Oktaviani, Viva and Tukimun, . (2024) The Effect of Soaking K-300 Concrete Using Seawater on Concrete Quality. Journal of Engineering Research and Reports, 26 (1). pp. 10-17. ISSN 2582-2926

O

Obasi, Romanus and Isife, Fredrick (2020) Geochemistry and Potential Industrial Application of Marble from Ikpeshi, South-West, Nigeria. In: Emerging Trends in Engineering Research and Technology Vol. 5. B P International, pp. 107-114. ISBN 978-93-90149-08-7

Okasha, Mohamed and Kralev, Jordan and Islam, Maidul (2022) Design and Experimental Comparison of PID, LQR and MPC Stabilizing Controllers for Parrot Mambo Mini-Drone. Aerospace, 9 (6). p. 298. ISSN 2226-4310

P

Patil, Supriya S. (2022) Development of Mathematical Model for Optimized Design of Fiber Optic Sensor Geometry Using Ray Tracing Technique. In: Technological Innovation in Engineering Research Vol. 3. B P International, pp. 10-27. ISBN 978-93-5547-692-0

Prasanna, A. and Premkumar, M. and Mohideen, S. Ismail (2022) ω- Fuzzy Translation and Multiplication in BH-Algebras. In: Technological Innovation in Engineering Research Vol. 3. B P International, pp. 44-52. ISBN 978-93-5547-692-0

Prasanth, S. and Ghosh, Goutam (2020) Assessment of Seismic Vulnerability of a Reinforced Concrete Building Located in India. In: Emerging Trends in Engineering Research and Technology Vol. 5. B P International, pp. 115-123. ISBN 978-93-90149-08-7

Pérez-Castán, Javier Alberto and Pérez-Sanz, Luis and Serrano-Mira, Lidia and Saéz-Hernando, Francisco Javier and Rodríguez Gauxachs, Irene and Gómez-Comendador, Víctor Fernando (2022) Design of an ATC Tool for Conflict Detection Based on Machine Learning Techniques. Aerospace, 9 (2). p. 67. ISSN 2226-4310

R

Rahouma, Kamel H. and Mohammed, Mennatullah and Salih, Khalid S. (2023) Design and Implementation of Light Fidelity Communication Systems: A Recent Study. In: Research and Developments in Engineering Research Vol. 1. B P International, pp. 102-116. ISBN 978-81-19102-73-0

Rawat, Udit and Anderson, Jackson D. and Weinstein, Dana (2022) Design and Applications of Integrated Transducers in Commercial CMOS Technology. Frontiers in Mechanical Engineering, 8. ISSN 2297-3079

Rodriguez, Ricardo J. and Lewis, Winston G. (2022) Radiofrequency (RF maxima) Propagation and Calculated Exposure Probability within Enclosures using GEV Theory. In: Novel Perspectives of Engineering Research Vol. 6. B P International, pp. 141-153. ISBN 978-93-5547-459-9

Ru, Man and Zhan, Ying and Cheng, Bin and Zhang, Yu (2022) Capture Dynamics and Control of a Flexible Net for Space Debris Removal. Aerospace, 9 (6). p. 299. ISSN 2226-4310

Ruggiero, Alessandro and Sicilia, Alessandro (2022) Implementation of a Finite Element Deformation Model Within an Elasto-Hydrodynamic Lubrication Numerical Solver for a Ball in Socket Tribopair. Frontiers in Mechanical Engineering, 8. ISSN 2297-3079

S

Saidi, Imen and Touati, Nahla (2021) Intelligent Control in Robotics: Design and Application. B P International. ISBN 978-93-5547-377-6

Sakai, Rina and Tanaka, Shuichi and Murakami, Kaya and Mizuhashi, Tomomi and Yoshida, Kazuhiro and Ujihira, Masanobu (2024) Flow Rate Measurement of Gravity Infusion Set and Functional Evaluation of Drop Counter: A Pilot Study. Journal of Biomedical Science and Engineering, 17 (07). pp. 129-135. ISSN 1937-6871

Salmasi, Farzin and Abraham, John (2022) Geological Considerations in Dam Engineering. In: Novel Perspectives of Engineering Research Vol. 6. B P International, pp. 97-125. ISBN 978-93-5547-459-9

Seitz, Arne and Nickl, Markus and Troeltsch, Florian and Ebner, Kathrin (2022) Initial Assessment of a Fuel Cell—Gas Turbine Hybrid Propulsion Concept. Aerospace, 9 (2). p. 68. ISSN 2226-4310

Shaaban, Awni K. (2021) Total Shading Strategies in Sustainable Housing Development in Oman. In: Advanced Aspects of Engineering Research Vol. 15. B P International, pp. 82-91. ISBN 978-93-91215-95-8

Shanmugapriya, P. and Naik, P. Maheswari (2020) AL-Transformation on M Class Ak * Operator. In: Emerging Trends in Engineering Research and Technology Vol. 5. B P International, pp. 124-132. ISBN 978-93-90149-08-7

Shi, Pengtao and Liu, Feng and Gu, Yingsong and Yang, Zhichun (2021) The Development of a Flight Test Platform to Study the Body Freedom Flutter of BWB Flying Wings. Aerospace, 8 (12). p. 390. ISSN 2226-4310

Sonny, Juma Nyeko and Samali, Violet Mlay and Bosco, Amerit and Boniface, Abima and Judith, Among and Abdallah, Ibrahim Nyero and Joseph, Odiya and Cosmas, Ogen (2023) The impact of electronic-electrical waste on human health and environment: A systematic literature review. Journal of Engineering and Technology Research, 15 (1). pp. 1-16. ISSN 2006-9790

Soriano, Roland and Belalo, Lester Joseph T. and Arnido, Rey Nino C. (2021) Expanded Usage Window of Molding Compound to Reduce Material Wastage in Manufacturing Line. Journal of Engineering Research and Reports, 20 (2). pp. 69-83. ISSN 2582-2926

Stoilov, T. and Stoilova, K. and Vladimirov, M. (2021) Decreasing the Computational Workload in Portfolio Optimization. In: Advanced Aspects of Engineering Research Vol. 15. B P International, pp. 63-81. ISBN 978-93-91215-95-8

T

Tan, Yuting and Madisetti, Vijay K. (2024) User Profile & Attitude Analysis Based on Unstructured Social Media and Online Activity. Journal of Software Engineering and Applications, 17 (06). pp. 463-473. ISSN 1945-3116

Tebeta, R.T. and Madushele, N. and Ngwangwa, H.M. and Madyira, D.M. and Wang, Z. (2023) High-pressure torsion effect on microstructural and hardness properties of Magnesium with Silicon Carbide nanoparticles. Engineering Solid Mechanics, 12 (2). pp. 165-176. ISSN 22918744

Tsai, Chun-Pu and Li, Wei-Chang (2022) CMOS-MEMS Vibro-Impact Devices and Applications. Frontiers in Mechanical Engineering, 8. ISSN 2297-3079

Tserpes, Konstantinos and Tzatzadakis, Vasileios (2022) Life-Cycle Analysis and Evaluation of Mechanical Properties of a Bio-Based Structural Adhesive. Aerospace, 9 (2). p. 64. ISSN 2226-4310

U

Uswarman, Rudi and Rushdi, Ali Muhammad (2021) Reliability Evaluation of Rooftop Solar Photovoltaics Using Coherent Threshold Systems. Journal of Engineering Research and Reports, 20 (2). pp. 32-44. ISSN 2582-2926

V

Vincent, De Paul TEKOUA KOUEMENE and Laurent, BITJOKA (2020) Prediction behavior of high frequency modulated by a 16 lengths Golay code undergoing honey attenuation. Journal of Engineering and Technology Research, 12 (1). pp. 1-11. ISSN 2006-9790

W

Waheed, M. A. and Sangotayo, E. O. (2022) Numerical Analysis of the Effect of Dynamic Viscosity Associated with a Continuously Moving Heated Horizontal Plate. In: Novel Perspectives of Engineering Research Vol. 6. Book Publisher International (a part of SCIENCEDOMAIN International), pp. 126-140. ISBN 978-93-5547-459-9

Wang, Ruoyu and Yu, Xianjun and Zhao, Ke and Liu, Baojie and An, Guangfeng (2022) Development and Validation of a Novel Control-Volume Model for the Injection Flow in a Variable Cycle Engine. Aerospace, 9 (8). p. 431. ISSN 2226-4310

X

Xuan, Teo Rong and Ness, Stephanie (2023) Integration of Blockchain and AI: Exploring Application in the Digital Business. Journal of Engineering Research and Reports, 25 (8). pp. 20-39. ISSN 2582-2926

Y

Yadaiah, K. and Biradar, Vijayalaxmi and Sukumar, G. Durga (2020) DM3730 Processor Hardware Debugging on Linux Platform and Its Application. In: Emerging Trends in Engineering Research and Technology Vol. 5. B P International, pp. 148-161. ISBN 978-93-90149-08-7

Yadav, P. J. (2022) Improved Yellow Phosphors for Solid State White Lighting: An Experimental Study. In: Technological Innovation in Engineering Research Vol. 3. B P International, pp. 53-60. ISBN 978-93-5547-692-0

Yu, Wan and Liu, Xiao and Su, Huashan and Zhang, Yangjun (2017) Drying Kinetics of Paper Mill Sludge. Energy and Power Engineering, 09 (04). pp. 141-148. ISSN 1949-243X

Yun, Xiaopeng and Zhang, Li (2022) Temperature and Pressure Effects on HMX/Graphene via ReaxFF Molecular Dynamics Simulations. Frontiers in Mechanical Engineering, 8. ISSN 2297-3079

Z

Zhang, Yongjie and Huang, Yingjie and Li, Zhiwen and Liang, Ke and Cao, Kang and Guo, Yazhou (2021) A Simplified FE Modeling Strategy for the Drop Process Simulation Analysis of Light and Small Drone. Aerospace, 8 (12). p. 387. ISSN 2226-4310

Zope, Anurag and Li, Sheng-Shian (2022) CMOS-MEMS Thermal-Piezoresistive Resonators and Oscillators for Sensors. Frontiers in Mechanical Engineering, 8. ISSN 2297-3079